[BLDG-SIM] DOE question

["Paul Reeves" <paulreeves5@xxxxxxxxxx>]

DOE2.2 has a Ground-Loop-HX that can model horizontal or vertical wells of a
ground-source heat pump when attached to a circulation loop.  The
capabilities are considered to be in the "testing mode", but the fairly
detailed model is fully documented in the DOE2.2 support docs.

Paul Reeves
Partnership for Resource Conservation
140 S. 34th Street, Boulder, CO 80303
(303) 499-8611   Paul.Reeves@xxxxxxxx


-----Original Message-----
From: Postman@xxxxxxxx [mailto:Postman@xxxxxxxx]On Behalf Of Dominique
Michaud
Sent: Wednesday, August 16, 2000 2:20 PM
To: BLDG-SIM@xxxxxxxx
Subject: [BLDG-SIM] DOE question


Is Doe capable of simulating a geothermal heat pump system?

If yes, through which command?

Thank you
Dominique Michaud

======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx