[BLDG-SIM] New York Energy Conservation Code

["Pat Bailey" <pbailey@xxxxxxxxxxxxx>]

Bob,

The CREST web site has information from the "Building Codes Assistance
Project" which lists the status of various codes by state.  It is my
understanding that the IECC either has or will supercede the MEC across the
board.  The web site below provides the newsletter that gives the updates on
state codes including MEC and IECC.  According to the site, New York has a
state developed code that nominally meets ASHRAE 90.1-1989.

http://solstice.crest.org/efficiency/bcap/050600.pdf

As a general note, the CREST web site is being shut down in July and will
re-emerge later under a difference moniker.  I would go there asap if you
need the information.

I hope this helps,

Pat Bailey
Principal, Energy Engineer
GeoPraxis, Inc.
461 Seventh Street West
Sonoma, CA 95476 USA

http://www.geopraxis.com
707.996.9408 voice
707.939.8702 fax



> -----Original Message-----
> From: Postman@xxxxxxxx [mailto:Postman@xxxxxxxx]On Behalf Of Bob Ramirez
> Sent: Tuesday, June 20, 2000 6:27 AM
> To: BLDG-SIM@xxxxxxxx
> Subject: [BLDG-SIM] New York Energy Conservation Code
>
>
> Hello All
>
> Does anyone know of a good on-line source of the latest Energy Code (is it
> the 1995 MEC?) used for new building construction in New York?
>
> Also, I believe NY is also considering adopting the 2000 Int'l Energy
> Conservation Code.  Know of any good online source for this code, and/or
> contacts in NY that I could call or e-mail to ask about this process?
>
> Any leads will be appreciated.  Thanks!
>
> Sincerely,
>
> Bob Ramirez
>
>
> Bob Ramírez (bobram@xxxxxxx or bob@xxxxxxx)
> Senior Engineer, P.E.
>
> Regional Economic Research, Inc.             http://www.rer.com
> 11236 El Camino Real, San Diego, CA 92130
> Phone: 858.481.0081 ext. 427
> FAX: 858.481.7550
>
>
>
>
> ==================
> You received this e-mail because you are subscribed
> to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
> from this mailing list send a blank message to
> BLDG-SIM-UNSUBSCRIBE@xxxxxxxx
>
>


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx