You can create a virtual HW loop and boiler to mimic the RTU gas furnace. Schedule the loop off during the summer with one of the loop schedules. Print some hourly reports to make sure it really is working. There may be a fatal flaw. Good luck.
IEC wrote:
I am modeling a building with gas heating in a packaged VAV rooftop unit. My model works great for the months when gas is actually used, but I want to shut the gas off during 7 months of the year. The problem with just using the heating schedule is that my zone reheat (electric) are also shut off which means my energy usage is too little. Does anyone know how to shut off the system heat without affecting the zone heat? I would appreciate any help. Thanks. I am using the PowerDOE interface. My apologies for not including that in
the original message.
--
Morgan Stewart======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx