[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[BLDG-SIM] Desiccant system simulations using DOE2.1e
I am modeling a building in DOE2.1e using the add on solid desiccant
dehumidification option.
How do I determine what the part load performance curves that the program is
using for the system? Pg 3.77 of the 2.1e supplement states that "For the
SOL-VENT-AIR-1 unit, they [the unit's exit temperature, exit humidity ratio,
gas use and auxiliary kW] are obtained from subroutines containing hardwired
curves."
Does this mean the curves for this equipment are not changeable? Do they
reflect actual system operation?
Included in the simulation output is the following info. How is it
interpreted?
**************DESICCANT DESIGN VALUES *************
SYSTEM= SYSTEM-1
PA = 0.7200E+04 TPI = 0.8748E+02 MPI = 0.5890E+02
WBPI = 0.6523E+02 IML = 0.1067E+02 MCL = 0.6248E+02
HE = 0.8500E+00 FANE = 0.5000E+00 MOTORE= 0.8500E+00
HXE = 0.9000E+00 DELPHX= 0.1000E+01 EVEFFR= 0.8500E+00
MODE = 0
TPU = 0.1596E+03 RBTU = 0.1599E+06 PAVET = 0.7610E+01
ABVIS = 0.4400E-01 VISCOS= 0.8490E+00 DELPP = 0.1417E+01
PBHP = 0.3211E+01 PAREA = 0.9000E+01 RAREA = 0.3470E+01
RVEL = 0.4511E+03 RAVET = -0.3500E+02 DELPR = 0.6757E+00
RBHP = 0.3328E+00 IMR = 0.1003E+03
PVEL = 0.8000E+03 TPO = 0.1027E+03 MPO = 0.3724E+02
VR = 0.1565E+04 TRI = 0.1900E+03 RRBTU = 0.1881E+06
PKW = 0.2819E+01 RKW = 0.2921E+00 DKW = 0.4388E+00
TOTKW = 0.3549E+01 IML1 = 0.1067E+02 IML2 = -0.9491E+01
Many thanks!
Brian Fountain,
Energy Engineer
Energy Advantage Inc.
Phone: (905) 337-2205 ext. 250
Fax: (905) 337-2209
e-mail: brian.fountain@xxxxxxxxxxxxxxxxxxx
690 Dorval Dr., Suite 400
Oakville, ON, L7K 3W7
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx