[BLDG-SIM] extracting hourly humidity

["Brian Fountain" <brian.fountain@xxxxxxxxxxxxxxxxxxx>]

I am trying to extract the hourly temperature and humidity for a space in a
DOE2.1e simulation.  Temperature is easy enough -- for VARIABLE-TYPE = u
name for zone, VARIABLE-LIST = (6) or (31) does the trick.  But what about
humidity?  Variable 47 is not appropriate on many system types yet report
SS-N gives me a zonal relative humidity plot.

So far my best guess is to use the return air humidity ratio.  Any other
suggestions?

Many thanks


Brian Fountain, P.Eng
Energy Engineer

Energy Advantage Inc.
690 Dorval Dr., Suite 400
Oakville, ON L6K 3W7
phone:  (905) 337-2205 ext. 250
fax:      (905) 337-2209

brian.fountain@xxxxxxxxxxxxxxxxxxx
<mailto:brian.fountain@xxxxxxxxxxxxxxxxxxx>


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx