|
Hi Fu Wing,
TRNSYS has a standard building example, which shows how
to connect things together. Just open the file
\Trnsys15\IISiBat3\Data\Samples\Building\Building.tpf
in IISiBat.
This should answer most of your questions.
This example is also described in the manual.
To connect your IISiBat project to the building made with PREBID,
use the 'External Files' tab in IISiBat (use the 'Browse' button next
to the BLD or TRN file name).
Werner
YU Fu wing wrote:
Dear
all I am working out
the cooling load calculation for a typical office building using TRNSYS
(version 15). I have prepared a waether data file in the TRNSYS TMY format
and the building model by using PREBID. Now I face difficulty proceeding
the calculation by using IISibat 3 with TYPE 56 as I found that the building
model requires the following inputs:
1.
FIKTIVE SKY TEMPERATURE; 2. INCIDENT RADIATION FOR ORIENTATIONS NORTH,
SOUTH, EAST, WEST AND HORIZONTAL; 3. INCIDENT BEAM RADIATION FOR ORIENTATIONS
NORTH, SOUTH, EAST, WEST AND HORIZONTAL; 4. ANGLE OF INCIDENCE FOR ORIENTATIONS
, SOUTH, EAST, AND WEST
I
have no idea about how to obtain these parameters based on my weather file.
At the same time, I would like to know a proper procedure to carry out
my calculation (i.e. whether my calculation can be finished within IlSiBat
3 entirely).
Best
regards
YU
Fu Wing
Research
Student
Department
of Building Service Engineering
The
Hong Kong Polytechnic University
Hong
Kong
e-mail:00901490r@xxxxxxxxxxxx
--
/ \____ Werner Keilholz, Software Development
Group Leader
\____/ CSTB Sophia Antipolis, SAIL
/ \____ s-mail: BP 209, 06904 SOPHIA ANTIPOLIS,
F R A N C E
\____/ phone: +33 (0)4 93 95 67 00 --
fax: +33 (0)4 93 95 67 33
/ \____ Mailto:werner@xxxxxxx
\____/ http://evl.cstb.fr/english/team/WK/werner.htm
For technical questions about our software, please mailto:software@xxxxxxx
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx
|