[Bldg-sim] chiller cost

I am looking for the cost of a scroll chiller.

Does anyone has some indication, either on a

per ton basis, or comparatively to other chiller's type?

_________________________________
Demba NDIAYE
Associé de recherche
École Polytechnique de Montréal
Tél : (514) 340-4711 # 5896
(514) 733-4395
Montréal (Québec)

----- Original Message -----

From: Jon McHugh

To: Bldg-sim@xxxxxxxx

Sent: Monday, September 30, 2002 2:12 PM

Subject: [Bldg-sim] Light Shelves

Wade,

Look at the method using daylight factors. Your physical model has to create results for several sun angles and an overcast sky - please refer to the DOE-2 manual for more details.

Jon McHugh, PE, LC
Heschong Mahone Group
11626 Fair Oaks Blvd #302
Fair Oaks, CA 95628 (Sacramento)
(916)962-7001
(916)962-0101 FAX
e-mail: mchugh@xxxxxxxxx
URL: www.h-m-g.com
-----Original Message-----
From: Wade McLaughlin [mailto:wmclaughlin@xxxxxxxxxx]
Sent: Monday, September 30, 2002 8:51 AM
To: Bldg-sim@xxxxxxxx
Subject: [Bldg-sim] Light Shelves

I see from the thread that this question may have gone unanswered in the past. I'll give it a try anyway.

I know that PowerDOE is not explicitly capable of modeling light shelves for daylight dimming measures. However, has anyone had any success manipulating a model to get reasonable approximations? I have results from a physical model that I can use to calibrate my methods, but I'm not sure where to start.

Many thanks in advance for your help.

Wade McLaughlin
DMI
450 Lexington St.
Newton, MA 02466
p 617-527-1525 x103
f 617-527-6606
==================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx
==================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx


=====================================================You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx