I received many suggestions for data sources for cold water inlet temperatures but the best was: EPRI TR-100212, December 1992, "Commercial Water Heating Applications Handbook" by D.W. Abrams & Assoc. I did some analysis of that data with NCDC degree day and average temperature data. Generally, the conclusion I came to is that average monthly and annual temperatures are no better at predicting inlet temperature then heating degree day data. That is the not what I expected. The R2 (goodness of fit) that I was getting are in the 0.4 - 0.6 range, not very good but expected. Here are the equations I'm planning on using: maximum inlet temp = -0.002860 * HDD + 87.8 average inlet temp = -0.003161 * HDD + 74.3 minimum inlet temp = -0.003135 * HDD + 59.3 Where HDD is the annual heating degree days base 65. As you can see the slopes are about the same but the y- intercepts are different. For those who want to explore the number some more, my spreadsheet is attached. Thanks to all who gave me references! Jason On 23 Dec 2002 at 16:11, I wrote: > I'm looking for a data source for typical inlet water > temperatures (water main temperature) for residential > service water heaters for locations in the United States. > This is roughly equivalent to the ground temperature at 6 to > 8 feet depth. The temperature varies seasonally so knowing > the average monthly value would be best. > > I am already aware of two sources of data that don't really > help: Engineering Weather Data from NCDC has the 50 ft > temperature and the map in the old ASHRAE Load Calculation > Manual is for depths of 4 inches. > > Any leads would be appreciated. > > Jason > > ========================================================= > Jason Glazer, P.E. mailto:jglazer@xxxxxxxx 847 698 5686 > GARD Analytics - http://www.gard.com/ 1028 Busse Highway, > Park Ridge, IL 60068 Building Energy Simulation and Analysis > Admin of BLDG-SIM list for building simulation users > > ====================================================== > You received this e-mail because you are subscribed > to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe from > this mailing list send a blank message to > BLDG-SIM-UNSUBSCRIBE@xxxxxxxx > ========================================================= Jason Glazer, P.E. jglazer AT gard DOT com 847 698 5686 GARD Analytics - http://www.gard.com/ 1028 Busse Highway, Park Ridge, IL 60068 Building Energy Simulation and Analysis Admin of BLDG-SIM list for building simulation users ====================================================== You received this e-mail because you are subscribed to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe from this mailing list send a blank message to BLDG-SIM-UNSUBSCRIBE@xxxxxxxx
Attachment:
inletWaterTempAnalysis.zip
Description: Zip archive