[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bldg-sim] DOE2.1E GSHP Model
Mike,
In 1998 we did an extensive amount of modeling and calibration of both
residential and commercial GSHP systems using v130 as part of a GHPC and
PG&E funded project. We found the DOE2 ground model to have some
limitations but in general to be quite good. Let me know if you need more
details.
Regards,
Leo Rainer
Senior Engineer
At 12:00 PM 9/16/03, Michael J. Witte wrote:
Does anyone have any experience with the DOE2.1E (JJH-132 version)
ground-source heat pump model? There are some cautions in the
original documentation indicating that it still needed more testing.
Is it well-behaved and useful for comparing relative energy-use vs.
competing technologies?
Mike Witte
========================================================
Michael J. Witte mjwitte@xxxxxxxx
GARD Analytics, Inc. www.gard.com
1028 Busse Highway Phone 847-698-5685
Park Ridge, Illinois 60068-1802 FAX 847-698-5600
USA Energy, Environmental and Economic Research
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx
----------------------------------------------------------------------------
Leo Rainer Email: mailto:lirainer@xxxxxxxxxxxxxxx
Davis Energy Group Phone: 530.753.1100 x27
123 C Street Fax: 530.753.4125
Davis, CA 95616 Web: http://www.davisenergy.com
============================================================================
Energy Analysis * Mechanical Design * Product Engineering
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx