[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[BLDG-SIM] Bulilding Simulation Software for Pools
An indoor pool model is available for TRNSYS 15. You can have a look at
the pdf manual to decide if the level of detail is suitable for you:
http://sel.me.wisc.edu/trnsys/components/type144-manual.pdf
Obviously, making a TRNSYS simulation with a building, a swimming pool
and the HVAC plant implies a significant development effort but you will
have the flexibility that goes with it.
Available TRNSYS components are listed on our website:
http://sel.me.wisc.edu/trnsys/ (go to "Component models" and "TRNLIB").
If you have trouble to locate the swimming pool model among the hundreds
of components, it is in "Component Models", then "non-standard
components for sale", under "Transsolar".
Regards,
Michaël Kummert
I am looking at a 50.000 indoor pool and my question is this:
Would Visual DOE be the preferred tool to simulate the building. It
will have a dehumidifcation heat pump for the pool and a combination
of distributed heat pumps and radiant floor water to water heat pumps
fed by an open loop system.
Thanks
Dave Stewart
--
_________________________________________________
Michaël Kummert - TRNSYS Coordinator
Solar Energy Laboratory - University of Wisconsin-Madison
1303 Engr Res Bldg, 1500 Engineering Drive
Madison, WI 53706
Tel: +1 (608) 263-1589
Fax: +1 (608) 262-8464
E-mail: kummert@xxxxxxxxxxxxx
SEL Web Site: http://sel.me.wisc.edu
TRNSYS Web Site: http://sel.me.wisc.edu/trnsys
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx