|
There was a thesis done at Lund Institute of Technology, in Sweden in 1997, that discussed typical load shapes in 6 categories of Swedish commercial buildings. The thesis is written by C. Noren, Department of Heat and Power Engineering, Division of Energy Economics and Planning, Lund, Sweden. The results are also reported in "Energy and Buildings", Vol. 28, Number 3, 1998. I came across this work when I was working on ASHRAE RP-1093 (Compilation of Diversity Factors and Schedules for Energy and Cooling Load Calculations), at Texas A&M few years ago.
Bass Abushakra, Ph.D. Assistant Professor, Building Environmental Systems Architectural Engineering and Building Construction Department Milwaukee School of Engineering 1025 N. Broadway, CC60-B Milwaukee, WI 53202 Phone: 414-277-4551 Fax: 414-277-7415 http://people.msoe.edu/~abushakr/index.htm
-----Original Message-----
can anybody suggest to me where to find an internal thermal loads profile (ie dependence with time) for residential (multi-story) buildings in europe ? Thanks =====================================================You received this e-mail because you are subscribed to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe from this mailing list send a blank message to BLDG-SIM-UNSUBSCRIBE@xxxxxxxx====================================================== You received this e-mail because you are subscribed to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe from this mailing list send a blank message to BLDG-SIM-UNSUBSCRIBE@xxxxxxxx |