[BLDG-SIM] nternal load profiles forresidential buildings in europe

["Ramirez, Bob" <Bob.Ramirez@xxxxxxxxx>]

Mornin' Jim

You should check out Itron/RER eShapes on our website.  You can download free end use load shapes for a variety of commercial building prototypes and heating/cooling fuel combinations:

http://www.rer.com/Online/eshapes.htm

The free shapes are available on the regional basis, shown in the map attached to this link:
http://www.rer.com/eshapes/map.htm


As described on the website, we also offer residential and industrial shapes, and we can also do custom applications (i.e. state level, shapes for specific end uses on, etc.).

The only caveat is that eShapes results are presented as kWh (electric) and kBtu (gas), so you would have to convert the kWh if you are interested in overall energy use in kBtu/sf/yr.

If you receive any other useful reference sources that aren't posted back to the group, could you please do so?

Thanks and good luck!

Sincerely,

Bob Ramirez



Bob Ramírez, P.E. 
Senior Engineer 
Bob.Ramirez@xxxxxxxxx 
 
Itron
http://www.RER.com/Consulting 
11236 El Camino Real  San Diego, CA 92130    USA
VOICE:858.481.0081X427  FAX:858.481.7550 
 
 


-----Original Message-----
From: Jim Dolan [mailto:jdolan@xxxxxxxxx] 
Sent: Wednesday, December 10, 2003 6:13 AM
To: BLDG-SIM@xxxxxxxx
Subject: [BLDG-SIM] nternal load profiles forresidential buildings in europe


 
I'm looking for annual energy consumption costing data for the NorthEast US. (or any other related research)  I.E. kBtu/sf/yr for typical buildings such as offices, schools, etc.  

Presently our most reliable data consists of our own research on buildings (not formalized), our own modeling efforts, and Energy Star Target Finder.  

Thank you 

James F. Dolan, P.E. LEED AP

OLA Engineering

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx



This message was scanned for viruses!!

=====================================================You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx