[bldg-sim] OA loads

[Chris Jones <cj@xxxxxxxxx>]

You won't find a report that tells you the actual OA heating and cooling 
loads - sensible and latent.  You need to calculate that yourself based on 
the outdoor air ratio at the peak heating/cooling times.

You can use hourly reports to help with this task.


> Hi:
> Outside ventilation air loads are excluded from the LS-C report in DOE 2. 
> Is it reported in any other report - as it is usually a major % of the 
> total loads. Is it in any of the system reports? Latent / sensible 
> separated, etc??
> How does one read it in DOE 2?
> Thank you.
> ~m
>
>
>
>
>
>
> You received this e-mail because you are subscribed
> to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
> from this mailing list send a blank message to
> BLDG-SIM-UNSUBSCRIBE@xxxxxxxx


Chris Jones, P.Eng.
14 Oneida Avenue
Toronto, ON M5J2E3
Tel. 416 203-7465
Fax. 416 946-1005 

=====================================================You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx