Greetings
All,
I am working on a project where I have a
make-up ventilation air system that serves 16 VAV air-handlers (one per
floor). The make-up air fan has a VFD to maintain constant pressure
in the duct as the OA Dampers at each floor modulate open and
closed. I am using DOE2.2 (eQUEST) and need help using the
OA-FROM-SYSTEM command. Specifically, I cannot resolve how to add a
system (make-up air fan) without a conditioned zone. Do I just
create a dummy zone that it serves or is there a better way.
Could someone who has used this command before
and modeled a similar system please offer some advise.
Thank you.
Mike
Michael
Tillou, PE
etc Group, Inc.
PO Box 749, North Adams, MA 01247
Ph. (413) 458-9870 Mbl. (413) 652-1087
www.etcgrp.com
----------------------------------------------------------------------
CONFIDENTIALITY NOTICE
This e-mail transmission, and any documents, files or previous e-mail
messages attached to it may contain confidential information that is
legally privileged. If you are not the intended recipient or the
person responsible for delivering it to the intended recipient, you are
hereby notified that any disclosure, copying, distribution or use of any
of the information contained in or attached to this transmission is
strictly prohibited. If you have received this transmission in
error, please immediately notify us by telephone at (413)458-9870 and
destroy the original transmission and its attachments without reading
them. Thank you.
You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx