[BLDG-SIM] (no subject)

["Tianzhen Hong" <thong@xxxxxxxxxxxxxx>]

Miguel

Why did you use two blocks for two zones? A block can contain multiple
zones as long as they have the same space height and are adjacent to
each other.

By default, all perimeter walls of a block are exterior walls. With
VisualDOE 4.0, you can delete an exterior wall and change an exterior
wall to an interior wall.

Tianzhen

> -----Original Message-----
> From: postman@xxxxxxxx [mailto:postman@xxxxxxxx] On Behalf Of 
> Miguel Jesus
> Sent: Wednesday, June 23, 2004 4:31 AM
> To: BLDG-SIM@xxxxxxxx
> Subject: [BLDG-SIM] (no subject)
> 
> 
> Hi
> I'm working in Visual DOE 3.1 and i would like to put some 
> questions,  
> to see if someone could give me some help. There are basic 
> questions ... Working in a block (block concept) it is 
> possible to distinguishe 
> different kind of partitions, i.e., if i have to different 
> walls between 
> two zones it is possible to model just like this?
> On the other side, if i model these two zones as two 
> different blocks, 
> despite the zones being together (they share a common wall), i think 
> visual doe will treat the share wall as two different façades 
> ... to the 
> exterior ...
> In short, i have two thermal zones, sharing a common wall 
> (composed by 
> two different walls). How can i model this?
> How can i resolve this difficulty?
> 
> Thanks for the help
> 
> Miguel
> 
> 
> 
> 
> ======================================================
> You received this e-mail because you are subscribed 
> to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
> from this mailing list send a blank message to 
> BLDG-SIM-UNSUBSCRIBE@xxxxxxxx
> 



=====================================================You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx