[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[BLDG-SIM] standard or typical schedules generated by eQUEST
Greetings,
everyone:
I'm trying to nail
down the source of the typical schedules
generated from
eQUEST. After some years aware from
modeling, I'm back
to working in the field. Currently, I'm modeling
a 450,000sf medical
facility, building a baseline for energy
use.
I'm curious about
the basis for the default profiles eQUEST uses
for occupancy,
equipment, lighting, infiltration and mass.
Also, other than the
eQUEST tutorial and online Help (and
the 5 volume DOE-2
manuals)
I'm wondering if there is
additional
documentation for eQUEST that might address
my question about
defaults for various building types and
corresponding
systems?
Any advice you all
might offer would be very much appreciated.
Thanks.
..Tom
Thomas J.
White, P.E.
Lead Engineer, Energy
Services
320 SW
Washington, Suite 200Portland,
OR 97204-2640T.
503.227.5280 F.
503.274.7674
Thinking. Inside the
building.
http://www.glumac.com
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx