[BLDG-SIM] eQuest 3-D View 22 Story Building - Missing Middle Floors

["Pat Bailey" <pbailey@xxxxxxxxxxxxx>]

Kevin,

The middle floors use a multiplier and hence are not present physically in
the model.  As far as I know the only way to have the other floors show up
in the Equest graphic is for you to add them to the model and remove the
multiplier for the middle floors.  The naming convention is generally G for
ground floor, T for top floor and M for mid floors.

Pat

_______________________

Pat Bailey, P.E.
Principal
GeoPraxis, Inc
205 Keller Street
Petaluma, CA 94952

www.geopraxis.com
707.766.7010 (v)
707.766.7014 (f)





-----Original Message-----
From: postman@xxxxxxxx [mailto:postman@xxxxxxxx]On Behalf Of Kevin Wyman
Sent: Tuesday, October 12, 2004 10:06 AM
To: BLDG-SIM@xxxxxxxx
Subject: [BLDG-SIM] eQuest 3-D View 22 Story Building - Missing Middle
Floors


I realize this is probably a feature, but in a 22 story apartment building I
am attempting to model in eQuest v3.5, the typical floors, 2-21 are missing
in the 3-D view. Is there a way to have those display? (More for a marketing
affect than anything else) Thanks for any advice.

_________________________________________________________________
Check out Election 2004 for up-to-date election news, plus voter tools and
more! http://special.msn.com/msn/election2004.armx


======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx




======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx