[BLDG-SIM] eQuest 3-D View 22 Story Building - Missing Middle Floors

[Scott Criswell <Scott.Criswell@xxxxxxxx>]

You can generate detailed building descriptions from wizard inputs w/ 
all floors individually modeled in version 3.51 (and later) of eQUEST.  
This new feature is only available within the Design Development wizard, 
so if your building is using the Schematic Design wizard, you will first 
have to convert it to DD.
Immediately below the fields on the first shell/envelope wizard screen 
where the user specifies the number of above/below grade floors is a new 
checkbox "Use Floor Multiplier".  Uncheck this box to generate a model 
w/ all floors individually modeled.

- Scott


Kevin Wyman wrote:

> I realize this is probably a feature, but in a 22 story apartment 
> building I am attempting to model in eQuest v3.5, the typical floors, 
> 2-21 are missing in the 3-D view. Is there a way to have those 
> display? (More for a marketing affect than anything else) Thanks for 
> any advice.
>
> _________________________________________________________________
> Check out Election 2004 for up-to-date election news, plus voter tools 
> and more! http://special.msn.com/msn/election2004.armx
>
>
> ======================================================
> You received this e-mail because you are subscribed to the 
> BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe from this mailing list 
> send a blank message to BLDG-SIM-UNSUBSCRIBE@xxxxxxxx



======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx