|
Hello: I would suggest you look at Volume III of
the IPMVP that shows M&V for new construction, which requires calibrated
simulation. JEff 8=! 8=)
:=) 8=) ;=) 8=) 8=( 8=) 8=()
8=) 8=| 8=) :=') 8=) 8=) 8=? Jeff S.
Haberl, Ph.D., P.E.............................j Professor......................................................Office
Ph: 979-845-6507 Department of
Architecture.......................Lab Ph: 979-845-6065 Energy Systems
Laboratory.......................FAX: 979-862-2457 8=/ 8=)
:=) 8=) ;=) 8=) 8=() 8=) :=)
8=) 8=! 8=) 8=? 8=) 8=) 8=0 From: postman@xxxxxxxx
[mailto:postman@xxxxxxxx] On Behalf Of Pat
Dolan Hopefully this is not straying too far away from simulation
discussions, but.... Is anyone familiar, or had any experience, with the
USGBC's LEED Energy and Atmosphere Measurement and Verification Credit? I
am aware that there is much written out there about the IPMVP, but I was
looking for specific information from people who have done M&V work
specifically to achieve the LEED credit. I am wondering if any US LEED projects
have actually obtained this credit besides the Chicago Center for Green
Technology and the Donald Bren School of Environmental Science &
Management. I am going to give a presentation to the local USGBC
chapter on the credit and I wondered if any other Bldg-Sim listers have
experiences that I could refer to in my presentation. Any information on
costs to meet the credit would be especially appreciated. Patrick Dolan Serena Sturm Architects, Ltd. 3351 Commercial Ave. Northbrook, IL 60062 847-564-0370, ext. 24 voice 847-205-5089, fax ==================You received this e-mail because you are subscribed to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe from this mailing list send a blank message to BLDG-SIM-UNSUBSCRIBE@xxxxxxxx=====================================================You received this e-mail because you are subscribed to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe from this mailing list send a blank message to BLDG-SIM-UNSUBSCRIBE@xxxxxxxx |