[bldg-sim] Procedure of modeling GSHP in eQUEST and hourly zone/coil loads

["Liu, Xiaobing" <xiaobing.liu@xxxxxxxxxxx>]

Title: Re: [bldg-sim] Procedure of modeling GSHP in eQUEST and hourly zone/coil loads

I've further question with regard to the simulation of GSHP in eQUEST:

 

In order to evaluate the design of a GSHP, we need to know the water side loop temperature, ideally after multi-years operation. But, the standard eQUEST output doesn't provide these information. Does DOE 2.2 calculate the loop temperature of a GSHP? If so, is there any clue of getting the loop temperature from eQUEST?

 Thanks,

 Xiaobing

=====================================================You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx