[bldg-sim] EQuest Question

["Vikram Sami" <VSami@xxxxxxxxxxxxxxxx>]

The simplest way to do the courtyard thing (through the wizard) is to model a small gap through one of the sides of the courtyard. What you'll need to do then is to go in and delete the 2 exterior walls facing the gap.

 

It is not possible to change interior wall types to exterior wall types (that I know of), but you can create an exterior wall in the same position, and delete the interior wall.

 

Vikram Sami, LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design · Technological Expertise · Exceptional Service
www.lordaecksargent.com

 

---

From: bldg-sim@xxxxxxxx [mailto:bldg-sim@xxxxxxxx] On Behalf Of Matt Barker
Sent: Friday, August 04, 2006 12:23 PM
To: bldg-sim@xxxxxxxx
Subject: [bldg-sim] EQuest Question

First Question:  How would you model a courtyard surrounded by classrooms and be able to place windows on the courtyard walls?

 

Second Question:  Is it possible to change an interior wall type into an exterior wall type?

 

Any help would be appreciated. 

 

Thanks,

Matt

==================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx

=====================================================You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx