|
Very simple. Model the chilled beam as a fan coil for
cooling only and remove the associated fan power.
Peter Simmonds Ph.D.
Associate
IBE
Consulting Engineers
14130
Riverside Drive Suite 201
Sherman
Oaks, CA 91423
p:
(818) 377-8220
f:
(818) 377-8230
m: (818) 219-1284
IDEAS FOR THE BUILT
ENVIRONMENT
This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure, or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message.
Greetings
I am seeking for any suggestions
or input on the model of active chilled beam system. In my
previous Trace model, it can not handle it very well by induction
system. I am very curious to get inputs and helps from other
folks. Thanks in advance.
Eric
Eric
Yang
Mechanical
Engineer, LEED.A.P.
SmithGroup
1850 K
Street, NW, Suite 250
Washington,
DC 20006
t
202.974.4555 (direct)
f.
202.974.4500
eric.yang@xxxxxxxxxxxxxx
www.smithgroup.com
==================
You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx
=====================================================You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx
|