[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BLDG-SIM] GSHP and Stove modeling

To: <BLDG-SIM@xxxxxxxx>
Subject: [BLDG-SIM] GSHP and Stove modeling
From: tim <altengineer@xxxxxxxxx>
Date: Thu, 21 Dec 2006 18:30:53 -0500
Authentication-results: mail.gard.com smtp.mail=altengineer@xxxxxxxxx; spf=pass
Authentication-results: mail.gard.com header.from=altengineer@xxxxxxxxx; domainkeys=pass (good); dkim=neutral (not signed)
List-unsubscribe: <mailto:BLDG-SIM-Unsubscribe@gard.com>
Reply-to: altengineer@xxxxxxxxx
Sender: BLDG-SIM@xxxxxxxx

I will be using eQuest to model a complex of housing units and will be examining two possible RE technologies for implementation: One is a ground source heat pump (gshp) and the other is a wood pellet stove.

IF anyone has experience incorporating one or both of these systems into a simulation any advice would be appreciated:

Specifically:

-Wood stove--what is the best way to represent a heat source like this?

-tips or tricks to avoid problems

-Validation of results

thanks a lot

tim

Prev by Date: [bldg-sim] Options for modelling wall insulation in EQUEST
Next by Date: [bldg-sim] Modeling buildings with natural ventilation forAppendix G
Previous by thread: [bldg-sim] Options for modelling wall insulation in EQUEST
Next by thread: [bldg-sim] Modeling buildings with natural ventilation forAppendix G
Index(es):
- Date
- Thread