[bldg-sim] How to edit the contents of the eQuest Project/Runs list?

["David S Eldridge" <DSE@xxxxxxxxxxxxxxxxx>]

The list is populated by the simulation results that are contained in
the "Projects" folder of your eQuest program directory.

If you want to remove some items from showing up, then you should make a
new folder (I use "Projects Archive") in the eQuest directory and move
the unused files to that folder.

Also if you are using eQuest on a project stored on a network folder,
the results viewer will show the results for all projects in the
"Projects" folder of eQuest along with all of the results that are in
the folder for the currently active project.

Alternately you could delete all of the files except for the *.inp and
*.pd2 for that particular project name and the results would go away,
but you would still have the input files in the same folder, you'd have
to re-simulate the files if you needed the results again.

Hope this helps!

David
 

> -----Original Message-----
> From: bldg-sim@xxxxxxxx [mailto:bldg-sim@xxxxxxxx] On Behalf 
> Of Brandon Nichols
> Sent: Wednesday, December 13, 2006 3:02 PM
> To: bldg-sim@xxxxxxxx
> Subject: [bldg-sim] How to edit the contents of the eQuest 
> Project/Runs list?
>  
> Since there are no Bldg-Sim questions so far today, let me 
> take this opportunity to ask a question that we've scratching 
> their heads over quite some time...
>  
> In eQuest 3.6 Reports Output mode, what controls the contents 
> of the list in the Project/Runs tab, and how can that list be edited?

=====================================================You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx