[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BLDG-SIM] eQUEST v3.6 Report issues

Title: eQUEST v3.6 Report issues
Hi Vikram,
I had that same problem because of a conflict with the results viewer in AEC's REMDesign software.  Do you by chance have that (or maybe something with the same results viewer) installed on your computer?  If so, the people at AEC were very helpful in fixing the problem.

Cheers,
Aleka
Aleka Pappas
Enermodal Engineering, Inc.
Denver, CO
tel: 303.861.2070
fax: 303.830.2016


Aulbach, John wrote:
Are the reports in the .INP file being called out?

From: Vikram Sami [mailto:VSami@xxxxxxxxxxxxxxxx]
Sent: Friday, December 01, 2006 12:02 PM
To: Aulbach, John; BLDG-SIM@xxxxxxxx
Subject: RE: [BLDG-SIM] eQUEST v3.6 Report issues

I'm able to open the SIM file, and the BEPS & BEPU reports seem to be in order. I'm just curious about the reports in eQUEST though.
 

Vikram Sami, LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design · Technological Expertise · Exceptional Service
www.lordaecksargent.com

 

From: Aulbach, John [mailto:jaulbach@xxxxxxxxxx]
Sent: Friday, December 01, 2006 2:58 PM
To: Vikram Sami; BLDG-SIM@xxxxxxxx
Subject: RE: [BLDG-SIM] eQUEST v3.6 Report issues

Are you sure there isn't a run error within the simulation itself? There should be a .SIM file you can view through the "back door", and see if something didn't compute.I have had similar situation, and a run error within the simulation didn't spit out into the eQuest interface. Not all errors show up in eQuest.

From: BLDG-SIM@xxxxxxxx [mailto:BLDG-SIM@xxxxxxxx] On Behalf Of Vikram Sami
Sent: Friday, December 01, 2006 11:25 AM
To: BLDG-SIM@xxxxxxxx
Subject: [BLDG-SIM] eQUEST v3.6 Report issues

I recently downloaded eQUEST v3.6 build 5200, and after running a simulation on it, I am unable to review any of the simulation results in eQUEST (the eQUEST post simulation reports all show up blank).

Has anyone else has had similar problems? If so - is there a fix and what is it?

Thanks

Vikram Sami, LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design · Technological Expertise · Exceptional Service
www.lordaecksargent.com 


==================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx
  

You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx
  

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx