[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BLDG-SIM] eQUEST v3.6 Report issues

Title: eQUEST v3.6 Report issues
I'm able to open the SIM file, and the BEPS & BEPU reports seem to be in order. I'm just curious about the reports in eQUEST though.
 

Vikram Sami, LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design · Technological Expertise · Exceptional Service
www.lordaecksargent.com

 

From: Aulbach, John [mailto:jaulbach@xxxxxxxxxx]
Sent: Friday, December 01, 2006 2:58 PM
To: Vikram Sami; BLDG-SIM@xxxxxxxx
Subject: RE: [BLDG-SIM] eQUEST v3.6 Report issues

Are you sure there isn't a run error within the simulation itself? There should be a .SIM file you can view through the "back door", and see if something didn't compute.I have had similar situation, and a run error within the simulation didn't spit out into the eQuest interface. Not all errors show up in eQuest.

From: BLDG-SIM@xxxxxxxx [mailto:BLDG-SIM@xxxxxxxx] On Behalf Of Vikram Sami
Sent: Friday, December 01, 2006 11:25 AM
To: BLDG-SIM@xxxxxxxx
Subject: [BLDG-SIM] eQUEST v3.6 Report issues

I recently downloaded eQUEST v3.6 build 5200, and after running a simulation on it, I am unable to review any of the simulation results in eQUEST (the eQUEST post simulation reports all show up blank).

Has anyone else has had similar problems? If so - is there a fix and what is it?

Thanks

Vikram Sami, LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design · Technological Expertise · Exceptional Service
www.lordaecksargent.com 


==================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx


=====================================================You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx