[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BLDG-SIM] radiant slab-ground source heat pump

Ramana,
I would recommend coupling the GSHP system with hot water baseboards operating at the same temperatures as your floor would require.  The in-floor radiant heat module of eQuest is rather simplistic and only includes the radiant floor system with no additional features (outside air, cooling, etc) so often you just have to design around the parameters of the mechanical system in terms of temperatures and design but use hot water baseboards.
Regards,
Renée

Renée Azerbegi, CEM, LEED-AP

ambient energy ? solar & sustainable design solutions

t 303.278.1532 | f 303.278.8533 | c 303.885.2695 | renee@xxxxxxxxxxxxx | ambient-e.com 

 

 


From: BLDG-SIM@xxxxxxxx [mailto:BLDG-SIM@xxxxxxxx] On Behalf Of Ramana Koti
Sent: Monday, March 19, 2007 3:46 PM
To: BLDG-SIM@xxxxxxxx
Subject: [BLDG-SIM] radiant slab-ground source heat pump

Dear all,

I was looking up the archives of the mailing list and I found the question but no responses, so my question might be a repeat:

Can a radiant slab (heating only) be connected to ground source heat pump in eQUEST? I tried but could not.  If not, any workarounds that can achieve the same effect?

Thanks,

Ramana Koti, Sustainable Building Analyst
LEED AP

ELEMENTS | a division of berkebile nelson immenschuh mcdowell architects
106 W. 14th Street Suite 200
Kansas City, Missouri 64105

p 816.783.1635 f 816.783.1501
www.bnim.com| elements.bnim.com

¢À Before you print think about the ENVIRONMENT 

=====================================================You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx