[BLDG-SIM] eQUEST daylight through interior windows

["Vikram Sami" <VSami@xxxxxxxxxxxxxxxx>]

As far as I know you cannot perform a daylight analysis through interior walls in eQUEST. Not sure how you can model this in eQUEST.

 

Vikram Sami, LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design · Technological Expertise · Exceptional Service
www.lordaecksargent.com

 

---

From: BLDG-SIM@xxxxxxxx [mailto:BLDG-SIM@xxxxxxxx] On Behalf Of Kingsley, Michael L.
Sent: Monday, March 12, 2007 10:21 AM
To: BLDG-SIM@xxxxxxxx
Subject: [BLDG-SIM] eQUEST daylight through interior windows

I am modeling a building with a 4-story internal atrium with skylights on the roof.  There are some interior rooms with interior windows facing the atrium, and I have enabled daylighting for these rooms.  When I run the simulation I get errors for all of the rooms with only interior windows saying that the window area must be greater than 0.1 ft2 for the room.  The windows are much larger than that.  Has anyone else run into this kind of problem?  Any thoughts?

 

Thanks in advance!

 

Michael L. Kingsley

E-mail:  kingsleym@saic.com

 

==================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx

=====================================================You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx