[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BLDG-SIM] 90.1-2004 ASHRAE Basecase

To: <BLDG-SIM@xxxxxxxx>
Subject: [BLDG-SIM] 90.1-2004 ASHRAE Basecase
From: "Steve Mignogna" <smignogna@xxxxxxxxx>
Date: Mon, 5 Mar 2007 17:37:03 -0500
Authentication-results: mail.gard.com smtp.mail=smignogna@xxxxxxxxx; spf=pass
Authentication-results: mail.gard.com header.from=smignogna@xxxxxxxxx; domainkeys=pass (good); dkim=neutral (1:-4:DKIM_SIGNATURE_BAD_BUT_TESTING;)
List-unsubscribe: <mailto:BLDG-SIM-Unsubscribe@gard.com>
Reply-to: smignogna@xxxxxxxxx
Sender: BLDG-SIM@xxxxxxxx

Hello,

I had a question regarding setting up a baseline model based on the ASHRAE 90.1-2004 standard. For the envelope requirements, the required values for the "Slab on Grade Flrs" and "Below Grade Walls" are in terms of "F-values" and "C-values" respectively. Since eQuest only takes the U or R values as inputs, I was wondering how these F and C values corresponded to them. Any help would be greatly appreciated.

Regards,

--
Steve Mignogna
Atelier Ten

Prev by Date: [BLDG-SIM] Process Loads and LEED
Next by Date: [BLDG-SIM] 90.1-2004 ASHRAE Basecase
Previous by thread: [BLDG-SIM] Process Loads and LEED
Next by thread: [BLDG-SIM] 90.1-2004 ASHRAE Basecase
Index(es):
- Date
- Thread