[BLDG-SIM] Simulation Result Retrieval

[Scott Criswell <Scott.Criswell@xxxxxxxx>]

This is most likely the result of there being a '.' in your project filename prior to the ending '.pd2'.  In most cases, saving your project to a new filename (w/ no dots prior to the ending '.pd2') will solve the problem.

- Scott


Matt Edwards wrote:

Hello,

 

I have run into an error message after simulation that prevents simulation results from being compiled and displayed.  Just before the simulation creates the hourly reports, four error messages appear each with the following format: "Error retrieving EG_MoEU_ED CSV simulation results for table 'Electric Consumption (kWh)' (returned -3)."  The additional errors reference 'Gas Consumption (kBtu),' 'Electric Demand (kW),' and 'Gas Demand (Btu/h).'  After clearing the error windows, the simulation completes "successfully," but no simulation output file is created for the run.  These error headings correspond to the graphic report headings that eQUEST automatically creates, and no data is recorded in the graphic report interface.  I have looked for errors in the .inp and .BDL files, but I have not found anything.  Is there any place that I can reconcile this error in order to retrieve the simulation output? 

 

Thanks,

 

 

Matt Edwards LEED ® AP

Mechanical Systems | Affiliated Engineers, Inc

5802 Research Park Blvd

Madison, WI 53719

 

Phone: (608) 236-1154 (direct)

Fax: (608) 238-2614

Email: medwards@xxxxxxxxxx

 

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx
  

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM@xxxxxxxx mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx