[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[BLDG-SIM] Heat Pump COP
Folks:
In eQuest, the Energy Input Ratio (EIR) can be derived from
EER or COP given for a unit or from a Standard. To correctly model such a unit,
one must subtract the fan energy for the unit to obtain the EER (EIR) of the
compressor only. This improves the input from, say, a COP of 12.3 to
15.
What about in the case of the heat pump heating COP? Must
one subtract out the fan energy here as well, thus "worsening" the COP for the
heating side?
I cannot find anything written on this
subject.
Thanks.
John R. Aulbach, PE, CEM
Project Manager
Nexant,
Inc.
100 North Barranca, Suite
820
West Covina, CA 91791 USA
Phone: 626-430-9054
Fax: 626-430-9060
=====================================================You received this e-mail because you are subscribed
to the BLDG-SIM@xxxxxxxx mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@xxxxxxxx